Magnum 6K8-Series Industrial Field Switch | Installation and User Guide (04/07) |
5.2.10New PoE (Power Pass-through), model P6KP8V-RJ45 (MDIX), 10/100Mb
8-port
| | | | 6KP8-45RJ | | | | |
The | 8 Port@ 10/100Mb Copper ports | | |
PoE RJ-45 ports | | | 1 | | 3 | 5 | | | 2 |
act similar to | | 10/10 | | | | | LK/AC | | 1 |
| | | | | | | |
| F/ H | 2 | | 4 | 6 | POE | | |
| | 10/10 | | | | |
regular RJ-45 | | | | | | LK/AC | | |
| F/H | | | | | POE | 4 | 3 |
| | | | | |
ports, except they | | LK/ACT | | |
1 | 2 | | 10/10 | | |
have capability of | LINK | | | | |
3 | PoE | | | 4 | | FULL/HALF | | |
| | | | | |
providing power
on each port to power up the PD devices, per the IEEE802.3af PoE standard. The Power Pass-through PoE modules are totally dependent upon the powerful -48VDC input power supply to support more RJ-45 (10/100) ports. Each port requires at least 15watts to power up the PoE PD devices. In this Fig. the top 8-RJ45 ports are enhanced with POE option The 8-RJ45 POE modules are also available with mix –n-match with fiber modules. Please check the ordering information Sec.1.2 for all the various P6K PoE modules option.
The LEDs on 6KP8-RJ45- PoE modules are slightly different compared to regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the PoE LED is ON when connected properly to an 803.af compliant PD device on that port. When non-PoE devices are connected, the PoE LED is OFF. PoE does not affect operation of Ethernet data traffic.
LINK and ACTIVITY LEDS are combined on the PoE modules into one LED that is marked as LINK/ACT, as shown in the diagram.
PoE LEDs Summary
•For PoE devices, each RJ-45 PoE port supports only 802.3af complaint devices. The PoE LED is ON when the attached PD is drawing power from the port.
•For non-PoE devices connected, the PoE port will act as a normal RJ-45 port and the PoE LED is OFF. No power is being sent out from the port.
•The PoE ports in Magnum 6K’s with 48VDC power input act as a pass- through, so the 48VDC power source must be strong enough to provide power to the 6K switch and to all the 8 RJ-45 ports with PD devices connected (up to 15 watts per PoE port).
www. GarrettCom . com
58
