GarrettCom 6K8 manual 6KP4V, ’cvr

	Magnum 6K8-Series Industrial Field Switch							Installation and User Guide					(04/07)
	Fiber	Speed,		Std.	Wave	Cable	X’mitr		R’cvr	Worst	Worst*	typical		typical*
	Port	Std.	Mode	km	-	Size	Output		Sens.	OPB,	distance	OPB,		distance
Module				fdx	length	µm	PT , dB		PR ,dB	dB	Km, fdx	dB		Km, fdx
				(hdx)	nm
6KP4V-		10Mb	Multi-	2	850	62.5/125	-15.0		-31	14	5	17		6
	F10ST	FL	Mode	(2)		100/140	-9.5		-31	19.5	5.9	23.5		7
						50/125	-19.5		-31	19.5	3.4	13.5		4.8
	6KPV-	100Mb	Multi-	2	1300	62.5/125	-20		-31	9.0	3.0	14		5
MST, MSC		FX	mode	(0.4)		50/125	-23.5		-31	5.5	2.0	12		4
6KPV-SSC		100Mb	Single-	18+	1300	9/125	-15		-31	14	28	17.5		35
		FX	mode	(0.4)
	6KPV-	100Mb	Single-	40	1300	9/125	-5		-34	29	58	32.5		65
		FX	mode	(0.4)
	SSCL
	6KPV-	100Mb	Multi-	2	1300	62.5/125	-20		-31	9.0	3.0	15.8		5.5
	MTRJ	FX	mode	(0.4)		50/125	-23.5		-31	5.5	2.0	12.2		4.0
	6KPV-	100Mb	Multi-	2	1300	62.5/125	-19		-31	12	4	16		5.7
		FX	mode	(0.4)
	MLC
6KPV-SLC		100Mb	Single-	15+	1310	9/125	-15		-28	11	22	-		-
		FX	Mode	(0.4)
	GBIC-	1000Mb	Multi-	0.55	850	62.5/125	-9.5		-17	5.5	2	12.5		4
			mode
	SXSC					50/125
	GBIC-	1000Mb	Single-	10	1300	9/125	-9.5		-20	8.5	17	10.5		21
			mode
LXSC10
	GBIC-	1000Mb	Single-	25	1550	9/125	-4.0		-21	15	37.5	17.5		43
			mode
LXSC25
	GBIC-	1000Mb	Single-	40	1550	9/125	-4.0		-21	15	60	17.5		70
			mode
ZXSC40
	GBIC-	1000Mb	Single-	70	1550	9/125	-3.0		-23	18	90	20.5		102
			mode
ZXSC70

*Note: The use of either multi-mode or single-mode fiber to operate at 100Mbps speed over long distances (i.e., in excess of approx. 400 meters) can be achieved only if the following factors are both applied:

•The 100Mb fiber segment must operate in full-duplex (FDX) mode, i.e. the full-duplex (factory default) setting for 100Mbps fiber ports must be used, and

•The worst-case OPB of the fiber link must be greater than the fiber cable’s passive Attenuation.

(Attenuation = Cable loss + LED aging loss + Insertion loss + safety factor)

www . GarrettCom . com

48