Magnum 6K8-Series Industrial Field Switch | Installation and User Guide (04/07) |
5.2.3 | 6KP6-RJSSC 4@ | | 6KP6-RJMSSC, | | |
10/100Mbps RJ-45 Ports | 4 Port@ 10/100Mbps and 2 @100 Mb SSC Fiber Port |
and 2@100Mbps single- | | 2 | | | |
mode FX-SC-type, “snap- | 1 | 3 | 5 | 7 | 1 |
in” connector | 10/100 | | | | LK |
| | | | |
The Magnum 6KP6-RJSSC is | | F/H | | ACT | |
| ACT | ACT | | |
| 4 | | |
also a Combo module | F/H | F/H | | 3 |
2 TX LKRX | 6 | TX LK RX |
equipped with 4 dual speed | | | | |
1 | LINK | 2 | 10/100 | |
copper ports and 2 Single- | |
| | 4 | | |
mode SC-type connectors. It | 3 | ACTIVITY | FULL/HALF | |
| | | | |
provides an advantage through combining copper and Fiber functions in one module of the 6K8-Series Switch supporting four Copper and two single-mode fiber network segments.
The 6KP6-RJSSC, when installed in a Magnum 6K8-Series Switch operates on copper at the 100m distances. The Fiber is single-mode and cable lengths can be as much as 25+ Km (see Power Budget, Section 4.5)
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and a FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates 100Mbps speed when lit and at 10Mbps speed when off. To distinguish the single-mode 6 K6-RJSSC from the multi-mode 6K6-RJMSC, the label “Sgl. M.” is at the top of the faceplate of the 6K6-RJSSC.
5.2.46KP6-RJSSCL 4 @ 10/100 MB copper port and 2@100Mbps single-mode FX-SC-type, “snap-in” connector
The Magnum 6KP6-RJSSC is also a Combo module equipped with 4 dual speed copper
ports and 2 Single-mode (Long Reach) SC-type connectors. It provides a combination of copper and Fiber functions in one module to the 6K8-Series Switches, supporting four Copper and two single-mode (Long-Reach) fiber network segments.
The 6KP6-RJSSC, when installed in a Magnum 6K8-Series Switch has copper supporting the 100m distances and Fiber supporting single-mode fiber cable lengths of as much as 40+ Km (see Power Budget, Section 4.5)
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and a
www . GarrettCom . com
53
