Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.

Caution Moving the jumper while the power is on can damage your server. Always turn off the server and unplug the power cords and all other cables before changing the jumper.

3 Remove the jumper across pins 2-3 of jumper J1H2 (Pass Clr), then place the jumper across pins 1-2.

4

5 Turn off the server, then disconnect the power cords and all other cables connected to the server.

6

7

Place the jumper back onto pins 2-3.

Follow the instructions in “Closing the server case” on page 39.

www.gateway.com

99