Preparing to install components

Important You must open your server case to install components. If you are not comfortable with these procedures, get help from a computer service technician or contact Gateway Customer Care.

Selecting a place to workWork on your server in an area that:Is clean (avoid dusty areas)Is a low-static environment (avoid carpeted areas)Has a stable surface on which to set your serverHas enough room to place all of your server partsIs near a grounded outlet so you can test your server after installation

Is near a telephone (in case you need help from Gateway Customer Care). The telephone must be directly connected to a telephone jack and cannot be connected to your server.

Gathering the tools you needSome tools and supplies that you may need to work on your server are:A notebook to take notesA Phillips screwdriverA small flat-blade screwdriverSmall containers to store various types of screwsA grounding wrist strap (available at most electronic stores)Getting Help

If you have questions about performing any of these procedures, contact Gateway Customer Care. For more information, see “Getting Help” on page 7.

36

www.gateway.com