Gateway 9315 Mounting your server into a cabinet, ■Nut bars (4), ■Disk guides (2), ■Server rails (2), ■Cabinet rails (2), ■Fastener pack (1), ■Handle spacers (2)

Mounting your server into a cabinet

The cabinet mounting hardware included with your server should be used with EIA-310-D standard 4-post cabinets that have front and back vertical posts. The L-shaped cabinet mounting brackets can be used for mid-mounting on a 2-post cabinet, but that procedure is not covered here. If your cabinet is a different type, obtain mounting hardware from the cabinet manufacturer.

Caution Before attaching cabinet accessories, make sure that the server is turned off and all power cords are unplugged.

Caution The cabinet must provide sufficient airflow to the front of the server to maintain correct cooling. It must also include ventilation sufficient to exhaust a maximum of 1200 BTUs per hour for this server.

Rackmount kit contents:■Server rails (2)■Cabinet rails (2)■L brackets (2, not used for this type of installation)■Fastener pack (1)■Small screws (4, #6-32 × 3/16-inch)■Medium screws (8, #10-32 × ½-inch)■Large screws (2, #10-32 × 7/8-inch)■Disk guides (2)■Handle spacers (2)■Nut bars (4)

www.gateway.com 13