Follow the instructions in “Opening the server case” on page 38.
If necessary, disconnect any cables that are attached to installed PCI expansion cards.

Removing and Installing PCI expansion cards

Caution The PCI riser assembly and individual PCI expansion cards are not hot-swappable. Before installing or removing the any part of the assembly, make sure that power is turned off and the power cord is unplugged.

Removing and installing the PCI riser assembly
To remove and install the PCI riser assembly:

1 Follow the instructions in “Preventing static electricity discharge” on page 37. Make sure that you turn off the server, then unplug the power cord and all other cables connected to the server.

2

3

4 Lift the PCI riser assembly from the system board by lifting the two, blue latches on the assembly.

www.gateway.com

69