6 Use a screw through each handle to secure the server to the cabinet posts.

7 Remove the bezel lock keys from the inside of the bezel, then snap on the bezel with the control panel area at the right.

8 To lock the bezel, insert the key into the lock and rotate it ¼ turn clockwise. To unlock it, rotate the key ¼ turn counter-clockwise.

Removing the server from a cabinet

To remove the server from a cabinet:

Warning Screws are required to support the front of the server. You must support the server while removing the front screws and while sliding the server off the cabinet rails. If the server is not supported, damage to the server or injury may result.

1 Remove the screws through the handles that hold the server in the cabinet. 2 While supporting the server, slide the server out from the cabinet.

www.gateway.com

19