To mount your server in a cabinet:

1 Remove the two screws from each handle, then set the handles and screws aside.

2 Align the slots in a server rail with the studs on the side of the server, then engage the slots with the studs and slide the rail back until it stops. (Your server may be different than the server shown in the example.)

Locking screw hole

Server rail

Slot

Locking screw hole

Mounting stud

Locking screw hole

Slot

3 Align the locking screw holes in the rails with the threaded screw holes in the server, then install the two locking screws through each rail.

14

www.gateway.com