
www.gateway.com
Some surge protectors and uninterruptible power supplies include simple
Uninterruptible power supplies
Use an uninterruptible power supply (UPS) to protect your server from data loss during a total power failure. A UPS uses a battery to keep your server running temporarily during a power failure and lets you save your work and shut down your server. You cannot run your server for an extended period of time while using only the UPS. To buy a UPS, visit accessories.gateway.com.
Removing and installing the bezel To remove and install the bezel:
1Follow the instructions in “Preventing static electricity discharge” on page 24. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server.
2If the server is mounted in a cabinet, remove the server from the cabinet. For instructions, see the instructions that accompanied the rail kit.
3If the bezel door is installed, unlock (if necessary) and open it.
4Open the server case by following the instructions in “Opening the server case” on page 25.
5Close the bezel door, then pull out on the three retaining tabs on the left side of the bezel to disengage the tabs from the chassis.
Retaining tab
Retaining tab
Retaining tab
11