
www.gateway.com
7Follow the instructions in “Opening the server case” on page 25.
8Remove the jumper from pins
9Follow the instructions in “Closing the server case” on page 26.
Resetting BIOS passwordsTo reset BIOS passwords, you must either reset and clear all BIOS settings, or use the Clear Password jumper. To reset all BIOS settings, follow the instructions in “Resetting the BIOS” on page 56.
To clear the BIOS password(s):
1Follow the instructions in “Preventing static electricity discharge” on page 24. Make sure that you turn off the server, then unplug the power cord(s) and all other cables connected to the server.
2Follow the instructions in “Opening the server case” on page 25.
Caution
Moving the jumper while the power is on can damage your server. Always turn off the server and unplug the power cords and all other cables before changing the jumper.
3Install a jumper across pins
4Follow the instructions in “Closing the server case” on page 26.
5Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
6Turn off the server, then disconnect the power cords and all other cables connected to the server.
7Follow the instructions in “Opening the server case” on page 25.
8Remove the jumper from pins
9 Follow the instructions in “Closing the server case” on page 26.
57