www.gateway.com

Channel 0 hot-swap hard drive cage

Channel 1 hot-swap hard drive cage

To remove and install a hot-swap hard drive:

Caution

Before you remove a failed drive, use the appropriate software and utilities installed on the server to stop all activity on the failed drive. Instructions for using the software are provided by the software manufacturer. Failure to do so may destroy the data on the drive.

1Pull the release lever on the hard drive carrier out, then pull the drive assembly (3) straight out of the server.

Important

The hard drive carriers shown in these illustrations may look different than the actual hard drive carriers in your server.

2If you are replacing a hard drive, remove the four screws that secure the old hard drive to the drive tray, then remove the drive from the tray.

- OR -

If you are adding a hard drive, remove the four screws that secure the dummy hard drive to the drive tray, then remove the dummy hard drive from the tray.

29