
CHAPTER 6: Troubleshooting
Sensor type | Sensor name | Sensor status | Current reading |
|
|
|
|
Voltage | 1.8V | Normal operating | 1.7848 Volts |
|
| range |
|
Voltage | 1.2V | Normal operating | 1.2125 Volts |
|
| range |
|
|
|
|
|
Temperature | CPU0 Diode 1 | Normal operating | 25 deg. C |
|
| range |
|
Temperature | CPU0 Diode 2 | Normal operating | 25 deg. C |
|
| range |
|
|
|
|
|
Temperature | CPU1 Diode 1 | Upper | 128 deg. C |
|
|
|
|
Temperature | CPU1 Diode 2 | Upper | 128 deg. C |
|
|
|
|
Temperature | MCH Ambient | Normal operating | 22 deg. C |
|
| range |
|
Temperature | FBD Ambient | Normal operating | 25 deg. C |
|
| range |
|
|
|
|
|
Temperature | ESB2 Ambient | Normal operating | 22 deg. C |
|
| range |
|
Processor | CPU0 State | Normal | 1 |
|
|
|
|
Processor | CPU1 State | Normal | 1 |
|
|
|
|
Physical Security | Chas Intrusion | Normal | 0 |
|
|
|
|
Button | UID BTN | State Deasserted | 0 |
|
|
|
|
Power Supply | PS1 STATUS | Unavailable |
|
|
|
|
|
Power Supply | PS2 STATUS | Unavailable |
|
|
|
|
|
Power Supply | PS REDUNDANCY | Unavailable |
|
|
|
|
|
Power Unit | Power Unit | Normal | 0 |
|
|
|
|
Watchdog 2 | Watchdog2 | Normal | 0 |
|
|
|
|
Sys. Event | SYS EVENT | Normal | 0 |
|
|
|
|
Troubleshooting
First stepsWarning
To avoid bodily injury, do not attempt to troubleshoot your server problem if:
-The power cords or plugs are damaged
-Liquid has been spilled into your server
-Your server was dropped
-The case was damaged
Instead, unplug your server and contact a qualified computer technician.
Try these steps first before going to the following sections:
•Make sure that the power cords are connected to your server and an AC outlet and that the AC outlet is supplying power.
•If you use a surge protector or a UPS, make sure that it is turned on and is rated to handle the power required by your server.
66