www.gateway.com
Miscellaneous messages
Keyboard Error
Keyboard is not present or the hardware is not responding when the keyboard controller is initialized.
Keyboard/Interface Error
Keyboard Controller failure. This may indicate a problem with system hardware.
System Halted
The system has been halted. A reset or power cycle is required to reboot the machine. This message appears after a fatal error has been detected.
Understanding sensors and sensor readings
Sensor type codes
The following section lists the sensors supported by the BMC, including type, name, status, and current reading. The status and current reading information is for example only.
Sensor type | Sensor name | Sensor status | Current reading |
|
|
|
|
Sys. ACPI Pwr State | ACPI State | Normal | 5 |
|
|
|
|
Module/Board | System Reset | State Deasserted | 0 |
|
|
|
|
Fan | SYS FAN 1 | Normal operating | 2362.39 RPM |
|
| range |
|
Fan | SYS FAN 2 | Normal operating | 1771.79 RPM |
|
| range |
|
|
|
|
|
Voltage | System 12V | Normal operating | 12.04 Volts |
|
| range |
|
Voltage | System 5V | Normal operating | 5.0652 Volts |
|
| range |
|
|
|
|
|
Voltage | System 5V STBY | Normal operating | 4.9848 Volts |
|
| range |
|
Voltage | System 3.3V | Normal operating | 3.4026 Volts |
|
| range |
|
|
|
|
|
Voltage | VTT CPU | Normal operating | 1.1931 Volts |
|
| range |
|
Voltage | VCORE 0 | Normal operating | 1.2901 Volts |
|
| range |
|
|
|
|
|
Voltage | VCORE 1 | Normal operating | 1.2901 Volts |
|
| range |
|
Voltage | VTT MEM | Normal operating | 0.8924 Volts |
|
| range |
|
|
|
|
|
Voltage | 1.5V NB | Normal operating | 1.4841 Volts |
|
| range |
|
Voltage | 1.9V PHY | Normal operating | 1.9206 Volts |
|
| range |
|
|
|
|
|
65