Gateway SYSMAN017AAUS manual Option, Function, To Change, COM1 COM2 COM3 COM4 or DISABLED

		User’s Guide 27
Option	Function	To Change
Disable	shuts off password protection	select (can only be selected if password is currently
		enabled); press Enter; type old password; press Enter.
Enables	turns on password protection	select (can only be selected if password is currently
		disabled); press Enter; type new password, press En-
		ter; type new password again; press Enter.
Change	changes password	select (can only be selected if password is currently
		enabled); press Enter; type old password, press Enter;

type new password, press Enter; type new password again; press Enter.

Port Assignment Menu

This menu allows you to designate port assignments for the system. Access this menu from the Main Setup Menu (See page 25.)

The following chart details the process for setting the Port Assignment Menu options. (After setting options, the screen automatically returns to the Main Setup Menu.):

Option	To Change
Serial Port	select; press Spacebar to toggle between:
	COM1; COM2; COM3; COM4; or DISABLED.
IR Port	select; press Spacebar to toggle between:
	COM1; COM2; COM3; COM4; or DISABLED.
Parallel Port	select; press Spacebar to toggle between: LPT1; LPT2; LPT3; or DISABLED.
Parallel IRQ	select; press Spacebar to toggle between: IRQ5or IRQ7.
Parallel Port	select; press Spacebar to toggle between: AT or BI-DIRECTIONAL.
General Audio	select; press Spacebar to toggle between: ENABLED or DISABLED.
Audio Base Port	select; press Spacebar to toggle between: 220h; 230h; or 240h.

Audio and MIDI IRQ select; press Spacebar to toggle between: IRQ5; IRQ2; IRQ10; IRQ5 &IRQ2;

	IRQ5 & IRQ11; IRQ10 & IRQ2; or IRQ10 & IRQ 11.
PC Speaker Audio	select; press Spacebar to toggle between: ENABLED or DISABLED.
Audio DMAC	select; press Spacebar to toggle between: DMA0 or DMA1.
MPU-401 Base Port	select; press Spacebar to toggle between: 300h; 320h; 330h; or DISABLED.