GBC F-36 manual Power Cord Connection

F-36 PRO Laminator Operation Manual Installation

WARNING

ALWAYS CHECK THE SENSORS PRIOR TO OPERATION! The sensors must be clean and contact the roll to maintain proper roll operating temperatures. The rolls can overheat and cause a fire or seriously damage the laminator.

7.Plug the laminator into an approved socket or have a certified electrician wire the laminator directly to a power source.

The laminator requires 30A single phase service and a power receptacle that accepts a 30A 250V NEMA L6-30P plug or, in Europe, 3 phase, 240/ 400 VAC with 20A per phase. See Figure 2-6 for power cord connection options.

8.Replace both cabinet covers.

EUROPEAN	LINE 1
3–PHASE Y	A
	N
	LINE 3
	LINE 2
	A
			THE EUROPEAN
		THREE-PHASE (STAR)
				LINE–1
				LINE–2
				LINE–3
				N
SINGLE PHASE (U.S.)	LINE 1				JUMPER

LINE 2

U.S. SINGLE PHASE

JUMPER

LINE 1

LINE 2

Figure 2-6: Power Cord Connection

© GBC Pro-Tech 1999 January 2-7