GBC F-36 manual Operation,    

Operation F-36 PRO Laminator Operation Manual

 

The operator controls for the F-36 PRO Laminator are located on the front of the unit, to the right of the oper- ator position. The names and functions of these con- trols￿￿￿￿￿￿￿￿￿￿￿￿are as follows:￿￿￿￿￿

7.UPPER ROLL HEATER CONTROLLER – Provides a readout of the temperature of the upper roll and the set-point for the desired temperature.

8.LOWER ROLL HEATER CONTROLLER– Provides a readout of the temperature of the lower roll and the set-point for the desired temperature.

Roll Pressure Display

Upper Roll Heat

ON/OFF

Lower Roll Heat

ON/OFF

	psi	kPa
	100	700
1	90	630
	80	560
	70	490
	60	420
	50	350
	40	280
	30	210
	20	140
	10	70
2
3

			6
OUT	175	HI
150		200
125		225	7
100		250
75		275
50	°F	300
PROTECH		001-133 LO
OUT	175	HI
150		200	8
125		225
100		250
75		275

Power

Indicator

Upper Roll Heater Controller

Lower Roll Heater Controller

Red: Set point has not been reached

Green: Temperature is exactly at set point

OUT	175	HI
	150	200
125		225
100		250

75275

50	300
PROTECH	°F 001-133 LO

Solid: Temperature is within 5° of set point

Blinking: Temperature is greater than 5° of set point

Off: Set point has been reached or exceeded

Solid: Temperature is within 5° of set point

Blinking: Temperature is lower than 5° of set point

Off: Set point has been reached or exceeded

Cooling Fan

ON/OFF

Speed Adjustment

4
	8	10
5	6	12
	4	48
	2	16
	0	18

50	300
PROTECH	°F 001-133 LO
	9
	10

AUTO/STOP

Motion Control

FORWARD/REVERSE

Figure 3-3: Heater Controller

9.AUTO/STOP - Turns the drive system on or off.

10.MOTION CONTROL FORWARD/REVERSE - Controls the direction of the drive system, forward, reverse, or stop.

Figure 3-2: Front Control Panel

1.ROLL PRESSURE DISPLAY – Displays the percentage of pressure pushing the main roll down.

2.UPPER ROLL HEAT ON/OFF – Turns the heater controller for the upper main roll on or off.

3.LOWER ROLL HEAT ON/OFF – Turns the heater controller for the lower main roll on or off.

4.COOLING FANS ON/OFF – Turns the cooling fans on or off and turns the vacuum table fans on or off, when a vacuum table option is installed.

5.SPEED ADJUSTMENT – Adjusts the speed of the machine from zero to the maximum as the con- trol is turned clockwise. (Turtle is slow, rabbit is fast)

6.POWER INDICATOR – Indicates when the main power is being applied to the machine.

WARNING

Use extreme caution when operating the laminator with the footswitch. The guard system is overridden and your fingers can get caught in the nip. You can be crushed or burned.

3-2 © GBC Pro-Tech 1999 January