1.4.1Feed Water Specifications
The feed water requirements listed in Table 1.1 must be met to ensure quality per- meate and extended membrane element life.
1.4.2Permeate Flow Rate
Stated in Table 1.1 and on the machine serial number label (assumes no permeate back pressure, 2000 mg/L Total Dissolved Solids (TDS) maximum feed concen- tration, and rated temperature).
To estimate permeate output with back pressure, use the formula below. Maximum permeate back pressure is 80 psig (5.5 bar).
(Specified Permeate) x [(Operating Pressure) - (Permeate Back pressure)]
(Operating Pressure)
1.4.3Concentrate Flow Rate
Stated in Table 1.1 and
1.4.4Pressure Range
The Pressure Ranges listed below (Table 2.1) are boost pressure: Boost Pressure = [(Primary Pressure -
Table 1.2
Minimum/Maximum (Min/Max)
Boost Pressure
MODEL | PUMP MODEL | PRIMARY PRESSURE |
|
| RANGE bar (psi) |
|
|
|
Tonkaflo, | 8.6 - 15.5 (125 - 225) | |
|
|
|
Tonkaflo, | 7.6 - 15.5 (110 - 225) | |
|
|
|
Tonkaflo, | 6.6 - 14.4 (100 - 210) | |
|
| |
|
|
|
Tonkaflo, | 6.6 - 12.8 (95 - 185) | |
|
|
|
Tonkaflo, | 5.2 - 9.3 (75 - 135) | |
|
| |
|
|
|
8