TROUBLESHOOTING
SYMPTOM | POSSIBLE CAUSES | REMEDIES |
|
|
|
Low operating pressure | Insufficient electrical power | Check the fuses or circuit |
(continued) |
| breakers; measure the voltage. |
|
|
|
| Pump not operating correctly | See Tonkaflo pump instruc- |
|
| tions. |
|
|
|
Low permeate flow rate | Low operating pressure | See possible causes for low |
|
| pressure. |
|
|
|
| Dirty or fouled membrane | Flush and clean the |
| elements | membrane elements. |
|
|
|
| Operating on cold water less | Install a hot/cold feed water |
| than 13°C (55°F) | tempering valve if more per- |
|
| meate flow is needed. |
|
| Operate with a feed water |
|
| temperature of 22° - 25°C |
|
| (72° |
|
|
|
| Membrane elements installed | Install membrane elements in |
| backward or damaged concen- | the direction of fluid flow. |
| trate seal | Flush and clean the machine |
|
| immediately. Membrane ele- |
|
| ments with damaged seals |
|
| should be cleaned and may be |
|
| returned for repair. |
|
|
|
| Flow meter inaccurate | Check the flow rate manually |
|
| with a stopwatch and calibrat- |
|
| ed container. |
|
|
|
26