14
. Install 4 AAA-size alkaline batteries (not included) for back up power in the event
of a power failure.
• Press the tab to open the battery compartment door located on the back of
the phone.
• Insert the batteries as shown on the diagram inside the battery compartment .
• Insert the tabs into place and snap the battery compartment door closed.
NoTE: if LOW BATTERY appears in the base display, you need to
replace the back up batteries. it is important that you replace them
as soon as possible to maintain unit operation when electrical
power is off. As a precaution, you may want to write down any
stored information you do not want erased.
CAUTioN: To reduce risk of personal injury, re, or damage
use only the 5-
2760
power adaptor listed in the user’s guide.
This power adaptor is intended to be correctly orientated in a
vertical or oor mount position.
iMPorTANT: if you are not going to use the telephone for more
than 30 days, remove the batteries because they can leak and
damage the unit.
3. Plug one end of the telephone line cord into the TEL LINE jack on the back of the
base and the other end into a modular jack.
Base Station
1. Choose an area near an electrical outlet and a telephone wall jack (RJ11C), and
place your cordless telephone on a level surface, such as a desktop or tabletop,
or you may mount it on the wall.