GE 819, 28129xx6, 28129xx5 manual Volume Settings, Making a Call, Landline Calls, Cellular Calls

Volume Settings

Speakerphone

Press the SPEAKER button on the base to activate the speakerphone. Use the VOLUME (5 or 6) buttons to adjust speaker volume on the base to a comfortable level. VOL1 is the minimum speaker volume and VOL8 is the maximum.

Handset

When the handset is ON (in talk mode), you may adjust the receiver volume by pressing the VOLUME 6 or 5 buttons on the side of the handset. There are four volume levels to choose from. When the maximum or minimum volume level is reached, the phone beeps twice. VOL 1 is minimum and VOL 4 is maximum.

Making a Call

Landline Calls

1.Press the TALK or SPKR button on handset or SPEAKER button on base. Dial the desired number.

-OR -

Dial the number and then press the TALK or SPKR button on handset or the SPEAKER button on the base.

- OR -

Use the or or button to select the desired record, then press the TALK or SPKR button on handset or the SPEAKER button on the base.

- OR -

Press and hold the number key to get the corresponding speed dialing number.

2.When finished, press the END/cancel button on the handset or base to hang up.

NOTE: You may enter up to 32 pre-dial digits.

NOTE: If you want to delete the pre-dial number you entered, press the DELETE/FLASH button until all of the digits are erased.

NOTE: To set the speed dialing number, refer to section “Phone Book -> Adding the Speed Dialing Number”.

Cellular Calls

1. In standby mode, dial the desired number, press Cell (SKR) button. - OR -

Use the or or button to select the desired record, then press Cell (SKR) button.

- OR -

36