
|
| Registering your name and number | ||
5 | After selecting or entering a value, press |
|
|
|
| [START/COPY]. | DATA ENTRY OK | ||
6 |
|
| ||
Repeat steps 4 and 5 as needed. |
| 2 | ||
|
|
|
|
|
7 When the operation is complete, press [STOP].
Registration ends and the FAXPHONE returns to standby mode.
After 60 seconds of no operation panel input, the FAXPHONE returns to standby mode and any unregistered changes are lost.
Entering a number_______________________________
Whenever you are prompted to enter a fax number or a telephone number, follow these procedures.
Use the numeric buttons to enter the number.
TEL=
❚You can enter up to 20 digits for your fax number or 50 digits for a speed dialing number.
❚Be sure to enter 1 and the area code, if necessary, to dial a different area code.
❚Do not enter dashes, slashes, commas, or other punctuation.
Use the
❚To enter a space between numbers, press [SPACE].
❚If you make a mistake, press [CLEAR] and enter the number again.
❚To erase a previously registered number, press [CLEAR]. You can also enter a new number over the old one.
If you need to enter a pause for any reason,
❚Press [REDIAL/PAUSE] at the desired point in the sequence when entering a series of digits.
❚A pause within a number is 2 seconds long. The length of this pause can be adjusted. See MID PAUSE SET in TX SETTINGS, p. 76. A pause at the end of a number is fixed at 10 seconds.
33