Summary Screen
www.GEAppliances.com
About the Wash Options
The Wash Options allow you to set options for the current wash cycle only. After you have made all desired changes, press OK.
Delay Start – Use to delay the start of your washer. Press DELAY START to change the delay time.
Presoak – Soaks the clothes before beginning the wash cycle. Press PRESOAK to change the soaking time.
Additives – Appears ONLY AFTER a presoak has been selected. Uses the contents of the Pretreat dispenser tray for a presoak. When selected, the washer will drain after the presoak and fill again for the wash cycle. Press ADDITIVES to specify if you will NOT be using a Pretreat additive or if you do not want the washer to drain after presoak.
Extra Rinse – Adds an additional cold rinse to the end of the wash cycle.
Signal – Alerts you that the cycle is complete. The clothes should be removed when the beeper goes off so wrinkles won’t set in. Touch SIGNAL to select the volume or to turn the beeper off. The new volume will be saved as the default setting.
Extended Spin – Increases the length of the spin time to extract more water from your clothes.
NOTE: The water level will vary depending on the load size and type. The washer uses adaptive filling and load sensing to provide the appropriate water level for effective and efficient wash performance and energy usage.
NOTE: Water may not cover the top level of the clothes. This is normal for high efficiency washers. The water fill is optimized by the system for better wash performance.
OPTIONS | OK | |
DELAY | 1HR | EXTENDED |
START | SPIN | |
PRE | 15 MIN | EXTRA |
SOAK | RINSE | |
ADDITIVES | SIGNAL | |
ARE YOU USING
PRESOAK ADDITIVES ?
YESNO
Adjusting the Time Settings
You can adjust the length of the wash cycle by
changing the cycle time, adding a Delay StartADJUST TIME SETTINGS or adding an Extending Spin.
Cycle Time – Press CYCLE TIME; then use the arrows to select more or less time.
10
Delay Time – Use to add a Delay Start to the beginning of the wash cycle. Press DELAY TIME; then set the DELAY START time in the OPTIONS menu.
Extended Spin – Increases the length of the spin time to extract more water from your clothes. Press EXTENDED SPIN; then select EXTENDED SPIN from the OPTIONS menu.
NOTE: After the wash cycle begins, you will not be able to change the Cycle Time or Delay Time. The washer will beep twice if you try to change the times after the cycle begins.
CYCLE TIME | DELAY TIME |
EXTENDED SPIN
