GE JGBP26, JG5P38, JG5P34 manual A Ala

1.CLEAWOFF. Press this pad to cancel all oven operations except clock and timer.

2.PROGRAM STATUS. Words light up in the display to indicate what is in the time display.

Programmed information can be displayed at any time by touching the pad of the operation you want to see. For example, you can display the current time of day while the timer is counting down by pressing the CLOCK pad.

3.TIME DISPLAY. Shows the time of day, the times set for the timer or automatic oven operation.

4.OVEN TEMPERATURE AND BROIL DISPLAY. Shows the oven temperature or the broil setting selected.

5.FUNCTION INDICATORS. Lights up to show whether oven is in bake, broil or self-clean mode.

6.INCREASE. Short taps to this pad increase the time or temperature by small amounts. Press and hold the pad to increase the time or temperature by larger amounts.

7.DECREASE. Short taps to this pad decrease the time or temperature by small amounts. Press and hold the pad to decrease the time or temperature by larger amounts.

8.BAKE. Press this pad to select the bake function.

9.BROIL. Press this pad to select the broil function.

AALA

10.CLEAN. Press this pad to select self-cleaning function. See the Operating the Self-Cleanin~ Oven section.

11.COOK TIME. Press this pad for Timed Baking operations.

12.STOP TIME. Use this pad along with the COOK TIME or CLEAN pad to set the oven to start automatically at a time you select.

13.CLOCK. To set the clock, first press the CLOCK pad. Then press the Increaser DECREASE pad to change the time of day. Press the CLOCK pad to start.

14.TIMER. Press this pad to select timer function. The timer does not control oven operations. The timer can time up to 9 hours and 55 minutes.

To set the timer, first press the TIMER pad. Then press the INCREASE or DECREASE pad to change the time.

To cancel the timer, press and hold the TIMER pad until the word “TIMER” disappears from the display.

lf “F- and a number” flash in the display and the oven control signals, this indicates function

error code. If the function error code appears during the self-cleaning cycle, check the oven door latch. The latch handle may have been moved, even if only slightly, from the latched position. Make sure the latch is moved to the right as far as it will go. Press the CLEAWOFF pad. Allow the oven to cool for one hour. Put oven back into operation.

If the function error code repeats, disconnect power to the range and call for service.

11