How to Set the Oven for Cleaning
Quick Reminder:
1.Prepare the oven for cleaning.
2.Close and latch the oven door.
3.Press the CLEAN pad.
4.Press the INCREASE pad.
If you wish to change the preset Clean Time of 4 hours, press the INCREASE or DECREASE pad until the desired Stop Time appears in the display.
1.Follow the directions in the Before a Clean Cycle section.
2.Close the oven door and slide the latch handle to the right as far as it will go.
Never force the door latch | 7 |
handle. Forcing the handle |
may damage the door lock mechanism.
n 3. Press the CLEAN pad.
CLEAN
4.Press the INCREASE or DECREASE pad until the desired Clean Tjme is displayed.
The Clean Time is normally 4 hours. You can change the Clean Time to any time between 2 and 4 hours, depending on the amount of soil in your oven.
The
5. When the LOCK light is off, slide the latch handle to the
left as far as it will go and
open the door.
+
To Stop a Clean Cycle
Press the CLEAWO~ pad. This will stop the cleaning cycle but you will not be able to open the door until the oven cools below the locking temperature.
After a Clean Cycle
When the clean cycle is finished, the word “CLEAN” will go out in the display and the oven will begin to cool. When the oven temperature has fallen below the locking temperature, the word “LOCK” goes out and the door can be opened.
After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth.
If white spots remain, remove them with a
If the oven is not clean after one clean cycle, the cycle may be repeated.
If the shelves have become hard to slide, wipe the shelf supports with cooking oil.
(continued next page)
25
