CAm Am CLEANNG

Proper care and cleaning are important so your range will give you efficient and satisfactory service. Follow these directions carefully in caring for it to help assure safe and proper maintenance.

BE SURE ELECTRICAL POWER IS DISCONNECTED BEFORE

CLEANING ANY PART OF YOUR RANGE.

~:-DO NOT OPERATE THE BURNER WITHOUT ALL BURNER PARTS AND DRIP PANS (IF SO EQUIPPED) IN PLACE.

Sealed Burner Assemblies (on some models)

The electrode of theElectrode spark igniter is

exposed. When

one burner is turned to LITE, all the bume spark. Do not attempt to

disassemble or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over hot cookware.

~rn all controls OFF before removing burner parts and drip pans (if so equipped).

The burner grates, caps, burner heads and drip pans (if so equipped) can be lifted off, making them

easy to clean.

Burner Caps (on sealed burners only)

Lift off when cool. Wash burner caps in hot, soapy water and rinse with clean water. If desired, soak up to 30 minutes

and scour with a plastic scouring pad to remove burned-on food particles. Dry them in a warm oven or with a cloth~on’t reassemble them wet.

Burner Base (on sealed burners only)

The burner base (the part of the

~ l ~

burner fastened to the cooktop) may

<</

be cleaned with a soft brush and a

@

mild cleanser. Clean all food residues

 

from around spark electrode. Do not use steel wool; small bits of steel wool will short out the electrode. Rinse well.

28

Page 28
Image 28
GE JG5P34, JG5P38, JGBP26 manual CAm Am Cleanng, Sealed Burner Assemblies on some models