Instructions
Care and cleaning of the cooktop.
Care and Cleaning Operating Instructions Safety
Appearance may vary.
The grate legs have one brass foot and three rubber feet. To order replacement rubber grate feet, please call our
National
Parts Center . . . . . . . . . 800.626.2002
Rubber Grate Feet . . #WB02T10101
Burner Grates and Vent Grille
Lift off when cool. Grates and grille should be washed regularly and, of course, after spillovers. Wash them in hot, soapy water and rinse with clean water.
Discoloration on the grates may also be removed by using the provided cooktop cleaning cream. Apply a drop or two on a damp cloth and rub across the discolored area. Rinse and dry. After cleaning, replace the burner grates and make sure they are positioned securely over the burners.
To remove
Although they are durable, the grates will gradually lose their shine, regardless of the best care you can give them. This is due to their continual exposure to high temperatures. You will notice this sooner with lighter color grates.
Do not operate a burner for an extended period of time without cookware on the burner grate. The finish on the grate may chip without cookware to absorb the heat.
Replacement
Before replacing the vent grille, make sure the grille gasket is properly installed around the downdraft vent opening, with the word “FRONT” toward the knobs. Replace the vent grille carefully over the gasket.
When replacing the grates, make sure they are positioned with their brass locator feet toward the center.
Grille
Vent Grille Gasket
Vent Filter
Brass
Locator Feet
NOTE: Do not clean the grates, grille or grille gasket in a
The grates, grille and grille gasket may be cleaned in a dishwasher.
Troubleshooting Tips
To order replacement filters, please call our
National
Parts Center . . . . . . . . . 800.626.2002
Filter . . . . . . . . . . . . . . #WB02X10651
Vent Filter and Chamber
Remove the vent grille and vent grille gasket. The filter is held in place at an angle with a hold bump. Lift the filter up and out of the vent opening diagonally.
Clean the filter by swishing it in hot, soapy water. Rinse well and dry thoroughly.
Do not operate the vent without the filter in place.
Consumer Support
Grille 
Vent Grille
Gasket
Vent Filter | Vent |
Chamber |
Remove and replace the filter diagonally through the vent opening.
12
When replacing the filter, make sure it rests, at an angle, on the supports in the vent opening.
To clean the vent chamber, use hot, soapy water. Do not use abrasive cleaners; they will damage the finish.
Replacement
Replace the filter after it is cleaned and dry. Replace the vent grille gasket by forming it around the vent opening and make sure the word “FRONT” is toward the knobs. Replace the grille.
