GE JSP69 warranty Step CONVERTINGFROMA +WIRETOA&WIRE HWER CORD, INSTWLTHESIDETRIM optional

Step 7

CONVERTINGFROMA +WIRETOA&WIRE HWER CORD

1.Removethe rear wire cover.

2.Removethe bottom strain refief screw and retain it for further use.

3.Removethe screw/hex nuts from the terminal block and retain them for further use.

4.Remove~ Swire or cable leads from the terrnind block and proceed to remove the power cord from the unit by pu~g in a downward motion so that the cord is removed born the strain retiet

5.Removethe grounding strap attached to the center terminal on the terminal block. The groundhg strap is not needed for this initiation. Mso remove the green ground screw and retain it for future use.

6.To ins~ the 4wire cord, fo~owSteps 4

through 9 of “hs-g a 4Wire Cord”.

7.Rekstil the rear cover and secure it with tie screw removed eartier.

~electrid connections should be inspected before power is turned on, to make certain that they are tight.

Step 8

INSTWLTHESIDETRIM (optional)

Udesired, the optionalside trim provided can be kstiled on the range. The side trim must be instiled above countertop level and tapped down into place.

The side trim can be mounted in several different positions depending on the countertop opening, cabinet structure and range features,

Frees~@ tith Backpbsh

To mounttrimflushwiththe frontofthe countertop,use number3 trimholesand ‘N range holes.

4“ BacW andBacksplash

To mountthe trimflushwith the front of the countertop,use number3 trimholes and ‘An rangeholes.

Optiod Montig

‘Amrangeholes Wow an extra3/8 forward adjustment.Trimholes number1,2 and 3 allow a 1/2” adjustment.me trimm be mountedin any desiredlocationusing the holes provided.

Ii I SideTrim

If the wuntefiopfront is roll

\formed,notchthe counterto allowfor overlappingtrim,

SideTrim

*

Sfide.in Installation with Roll Fomad Countertop

(continuedn&page)

53