GEAppliances.com

Oven Control, Clock and Timer Features and Settings

BAKE Pad

CLOCK Pad

Touch to select the bake function.

Touch before setting the clock.

Instructions Operating Instructions Safety

BROIL Pad

Touch to select the broil function.

OVEN LIGHT Pad

Touch to turn the oven light on or off.

SELF CLEAN Pad

Touch to select self-cleaning function.See the Using the self-cleaning oven section.

START Pad

Must be touched to start any cooking or cleaning function.

Number Pads

Use to set any function requiring numbers such as the time of day on the clock, the timer, the oven temperature, the internal food temperature, the start time and length of operation for timed baking and self-cleaning.

CONTROL LOCKOUT

The control lockout is 9 and 0. Touch and hold the 9 and 0 pads at the same time for 3 seconds.

CLEAR/OFF Pad

Touch to cancel ALL oven operations except the clock, timer and control lock-out.

KITCHEN TIMER Pad

Touch to select the timer feature.

DELAY START Pad

Use along with COOKING TIME or SELF CLEAN pads to set the oven to start and stop automatically at a time you set.

COOKING TIME Pad

Touch and then touch the number pads to set the amount of time you want your food to cook. The oven will shut off when the cooking time has run out.

Display

Shows the time of day, oven temperature, whether the oven is in the bake, broil or self-cleaning mode and the times set for the timer or automatic oven operations.

If “F–” and a number or letter flash in the display and the oven control signals, this indicates a function error code. Touch the CLEAR/OFF pad. Allow the oven to cool for one hour. Put the oven back into operation. If the function error code repeats, disconnect the power to the oven and call for service.

If your oven was set for a timed oven operation and a power outage occurred, the clock and all programmed functions must be reset.

The time of day will flash in the display when there has been a power outage.

Support Consumer Tips Troubleshooting Cleaning and Care

11