GEAppliances.com

Stainless Steel Surfaces (on some models)

Safety

Do not use a steel wool pad; it will scratch the surface.

To clean the stainless steel surface,

use warm sudsy water or a stainless steel cleaner or polish. Always wipe the surface in the direction of the grain. Follow the cleaner instructions for cleaning the stainless steel surface.

To inquire about purchasing stainless steel appliance cleaner or polish, or to find the location of a dealer or Mabe Parts Store nearest you, please call our toll-free number:

National Parts Center

1.800.626.2002 (U.S.)

 

1.800.661.1616 (Canada)

GEAppliances.com (U.S.)www.GEAppliances.ca (Canada)

Operating Instructions

Painted Surfaces

Painted surfaces include the top and

Do not use commercial oven cleaners,

sides of the door, and the drawer front.

cleaning powders, steel wool or harsh

Clean these with soap and water or

abrasives on any painted surface.

a vinegar and water solution.

 

Oven Vent

 

The oven is vented through an opening

prevent the oven vent from working

Center vent

in the cooktop under the grille.

properly.

Never cover the opening with aluminum

 

 

 

Cooktop

foil or any other material. This would

 

Cleaning and Care Instructions
Control Panel

If desired, the touch pads may be turned off before cleaning.

See the Range Lock-Out or Control Lock-Out section.

Clean up splatters with a damp cloth.

You may also use a glass cleaner.

Remove heavier soil with warm soapy water. Do not use abrasives of any kind.

Turn on the touch pads after cleaning.

Troubleshooting
Storage Drawer Removal

 

To remove the drawer:To replace the drawer:

Pull the drawer out until it stops.

Place the drawer rails on the guides.

Lift the front of the drawer until the

Push the drawer back until it stops.

stops clear the guides.

Lift the front of the drawer and

Rail Stop guide

push back until the stops clear the

Remove the drawer.

 

guides.

 

Lower the front of the drawer and

 

push back until it closes.

37

Support Consumer Tips