GE ZSA2201 Troubleshooting, Questions? Use this problem solver, See Other Features Section

Models: ZSA2201

1 80
Download 80 pages 46.77 Kb
Page 38
Image 38
Door not securely closed.

Troubleshooting

Advantium Oven

Questions?

Use this problem solver

Problem

Possible Causes

DISPLAY

 

The display is blank.

The display has

 

been turned off.

“Control Panel

The control has

LOCKED” appears

been locked.

in display.

 

Control display is

Clock is not set.

lighted yet oven

Door not securely closed.

will not start.

 

 

START/PAUSE pad

 

not pressed after entering

 

cooking selection.

 

Delay Start was

 

accidentally set.

 

Oven is in DEMO Mode

CLEAR/OFF was pressed accidentally.

OTHER PROBLEMS

What To Do/Explanation

• Check the SETTINGS menu for clock

display settings. Turn the display on.

• Press and hold CLEAR/OFF for about

3 seconds to unlock the control.

See Other Features Section.

• Follow prompts to set the clock.

• Open the door and close securely.

• Follow prompts

• Press CLEAR/OFF and reset.

• Unplug the oven for 1 minute, plug

the oven back into the wall DO NOT set

the oven clock, press and hold the HELP

and START/PAUSE pads for 3 seconds.

The control should exit DEMO mode.

Set clock and continue.

• Reset cooking program and press

START/PAUSE.

The door and inside of the oven feels hot.

Floor of the oven is warm, even when the oven has not been used.

The oven

produces intense heat in a small space.

The cooktop light is located below the oven floor. When the light

is on, the heat it produces may make the oven floor get warm.

• This is normal.

• Use oven mitts to remove food when

when ready.

• This is normal.

Oven will not start. A fuse in your home may be blown or the circuit breaker tripped.

Power surge.

Plug not fully inserted into wall outlet.

Glass microwave tray does not lock into center hub.

• Replace fuse or reset circuit breaker.

• Unplug the oven, then plug it back in.

• Make sure the plug on the oven is

fully inserted into wall outlet.

• Align the protrusions on the bottom of

the glass microwave tray with the

indentation in the turntable. This fit is

not tight, some movement is normal.

38

Page 38
Image 38
GE ZSA2201 Troubleshooting, Questions? Use this problem solver, See Other Features Section, Door not securely closed