IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING

nRead all instructions before using this appliance. When using electrical appliances, basic safety precautions should be followed, including the following:

nRead and follow the specific precautions in the Precautions to Avoid Possible Exposure to Excessive Microwave Energy section above.

nThis appliance must be grounded. Connect only to a properly grounded outlet. See the Grounding Instructions section on page 8.

nThis microwave oven is UL listed for installation over both gas (less than 60,000BTU) and electric ranges.

nThis over-the-range oven is designed for use over ranges no wider than 36.″ It may be installed over both gas and electric cooking equipment.

nDo not operate this appliance if it has a damaged power cord or plug, if it is not working properly, or if it has been damaged or dropped. If the power cord is damaged, it must be replaced by General Electric Service or an authorized service agent using a power cord available from General Electric.

Advantium Oven

nTo reduce the risk of fire in the oven cavity:

—Do not overcook food. Carefully attend appliance when paper, plastic or other combustible materials are placed inside the oven while cooking.

—Remove wire twist-ties and metal handles from paper or plastic containers before placing them in the oven.

—Do not use the oven for storage purposes. Do not leave paper products, cooking utensils or food in the oven when not in use.

—Do not pop popcorn in your microwave oven unless in a special microwave popcorn accessory or unless you use popcorn labeled for use in microwave ovens.

—If materials inside the oven ignite, keep the oven door closed, turn the oven off and disconnect the power cord, or shut off power at the fuse or circuit breaker panel. If the door is opened, the fire may spread.

—Do not use the Sensor Features twice in succession on the same food portion. If food is undercooked after the first countdown, use COOK BY TIME for additional cooking time.

—Do not use the oven to dry newspaper.

IMPORTANT SAFETY INSTRUCTIONS

nBe sure your appliance is properly installed and grounded by a qualified technician in accordance with the provided installation instructions.

nInstall or locate this appliance only

in accordance with the provided installation instructions.

nSome products such as whole eggs and sealed containers—for example, closed jars—are able to explode and should not be heated in this oven. Such use of the oven could result in injury.

nDo not mount this appliance over a sink.

nThis oven is not approved or tested for marine use.

nThis oven is UL listed for standard wall installation above 36 inches.

nDo not operate this appliance if it has been damaged or dropped.

nAs with any appliance, close supervision is necessary when used by children.

nUse this appliance only for its intended use as described in this manual.

nDo not use corrosive chemicals or vapors in this appliance.

nThis oven is specifically designed to heat, dry or cook food, and is not intended for laboratory or industrial use.

nThis appliance must only be serviced by qualified service personnel. Contact nearest authorized service facility for examination, repair or adjustment.

nDo not cover or block any openings on the appliance

SAVE THESE INSTRUCTIONS

3

 

Page 2 Page 4
Page 3
Image 3
GE ZSA2201 owner manual Important Safety Instructions, To reduce the risk of fire in the oven cavity
Page 2 Page 4

ZSA2201 specifications

The GE ZSA2201 is a high-performance analog-to-digital converter that has garnered attention for its impressive features and capabilities, making it ideal for a variety of applications. This device is particularly sought after in industries such as telecommunications, instrumentation, and medical equipment, where precise data acquisition is critical.

One of the standout features of the GE ZSA2201 is its resolution, which can reach up to 24 bits. This high resolution allows the device to capture extremely subtle changes in voltage levels, providing users with the ability to measure signals with unparalleled accuracy. The converter's sampling rate is also noteworthy, supporting rates up to 1 MSPS (million samples per second). This enables the GE ZSA2201 to handle fast-changing signals, making it suitable for high-speed applications.

In terms of technologies, the ZSA2201 utilizes sophisticated delta-sigma modulation, which enhances its performance by reducing noise and improving the signal-to-noise ratio. This technology is essential for applications that require high fidelity in signal representation. The converter supports various input voltage ranges, making it versatile for different measurement scenarios. Users can easily configure it to suit their specific application needs, whether it be low-voltage or higher voltage environments.

The device is designed with integrated features that facilitate easy interfacing and communication. It supports standard digital communication protocols such as SPI (Serial Peripheral Interface), ensuring compatibility with a range of microcontrollers and other digital systems. This ease of integration simplifies the design process and reduces development time for engineers.

Moreover, the GE ZSA2201 is built to operate effectively across a wide temperature range, making it reliable in diverse environmental conditions. Its packaging is also designed to endure the rigors of industrial settings, ensuring robustness and longevity.

Finally, the GE ZSA2201 exemplifies a commitment to energy efficiency, with a low power consumption profile that contributes to longer operational life in battery-powered applications. In summary, the GE ZSA2201 is a versatile and high-performance analog-to-digital converter that excels in accuracy, speed, and reliability, making it a top choice for engineers looking to enhance their data acquisition systems.
Top Page Image Contents