General Information
Generator control is limited to the following output options (referred to as “Hooks”).
1.Use Keyswitch
2.Force Off – cleared with “Use Keyswitch” hook
field. Moving off an edit field while in edit mode auto- matically enters the value displayed. Also, while in edit mode, pressing the Home button will return the parameter to the last value entered.
3.Force Manual – cleared with “Use Keyswitch” hook
4.Force Auto – cleared with “Use Keyswitch” hook
5.Force Dialout
6.Halt ILC
7.Force Alarm/Warning #1
8.Force Alarm/Warning #2
9.Force Remote Start
For detail in programming the ILC, refer to the ILC manual.
LEFT DISPLAY PAGES
The left display has five “fixed” parameter pages: System Voltages, System Power, Transfer Switch Mimic Diagram, Generator Frequency Graph, and System Alarm Log. A sixth page is selectable, but has no function at this time. The left display page is deter- mined by selecting the right display menu item, “Left Display”. To change the left display, do the following:
Press the “MENU” button.
THE FRONT PANEL DISPLAY
The front panel display consists of two LCD displays that are 4 rows of 20 characters each and a key pad with seven buttons and two LEDs.
LEFT DISPLAY
The left display is used to display a “fixed” set of parameter pages and has no cursor or entry fields. The key pad has no direct control of its contents. Its contents are determined by a menu selection on the right display.
RIGHT DISPLAY
The right display has several pages and responds directly to the key pad. There are two “quick” buttons on the key pad that are used to go directly to either the Home page or the Menu page. The Enter button is used to enter and exit edit mode, operate an out- put override, or select another page. When not in edit mode, the arrow buttons are used to navigate around the page to either an edit field or a control field. When in edit mode, the up/down buttons slew up or down through the available values and the right/left buttons are used to change to a different digit or edit
Press the button to move to the “Left Display” field.
Press the “ENTER” button to display the “Left Display” menu page.
The “>…..<” indicates which page is currently dis-
played on the left display. Use the arrow buttons to move the cursor to the desired page name and press the “ENTER” button. The left display will change to the new page and the “>…..<” will move to the
selected page name.
11
