Gigabyte GA-73PVM-S2H Date, Time, IDE Channel 0 Master/Slave, IDE Channel 2/3 Master/Slave

2-3	Standard CMOS Features
		CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
			Standard CMOS Features
	Date (mm:dd:yy)		Mon, Oct 1 2007			Item Help
	Time (hh:mm:ss)		22:31:24		Menu Level`
` IDE Channel 0 Master			[None]
` IDE Channel 0 Slave			[None]
` IDE Channel 2 Master			[None]
` IDE Channel 2 Slave			[None]
` IDE Channel 3 Master			[None]
` IDE Channel 3 Slave			[None]
	Drive A		[1.44M, 3.5"]
	Floppy 3 Mode Support		[Disabled]
	Halt On		[All, But Keyboard]
	Base Memory		640K
	Extended Memory		510M
KLJI: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit	F1: General Help
	F5: Previous Values		F6: Fail-Safe Default		F7: Optimized Defaults

Date

Sets the system date. The date format is week (read-only), month, date and year . Select the desired field and use the up arrow or down arrow key to set the date.

Time

Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or down arrow key to set the time.

IDE Channel 0 Master/Slave

IDE HDD Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.

IDE Channel 0 Master/Slave

Configure your IDE/SATA devices by using one of the three methods below:

•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
•	Manual	Allows you to manually enter the specifications of the hard drive when the
		hard drive access mode is set to CHS.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), CHS, LBA,
		Large.

IDE Channel 2/3 Master/Slave

IDE Auto-Detection

Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
Extended IDE Drive
Configure your IDE/SATA devices by using one of the two methods below:
•	Auto	Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
•	None	If no IDE/SATA devices are used, set this item to None so the system will
		skip the detection of the device during the POST for faster system startup.
Access Mode		Sets the hard drive access mode. Options are: Auto (default), Large.
		- 39 -	BIOS Setup