Serial ATA RAID BIOS Utility Operation Introduction
1.Boot your system. If this is the first time you have booted with the South bridge and the drives installed, the onboard BIOS will display the following screen.
Silicon Integrated System Corp. RAID BIOS Settings Utility V.xxxx
(c)
2.Press <Ctrl>+<S> keys to display the SiS RAID BIOS Setting Utility Main Menu.
3.Press <R> to display the RAID setup menu below. This is the fastest and easiest method to creating your first array.
SiS RAID BIOS Setting Utility
Disk Status
[B] : Select Boot Disk
[R] : Enter Raid Setup Utility
[Q] : Exit current menu |
|
|
|
|
| |
Location | Model | Capacity | Mode | RAID Type | ||
Pri_Master | Maxtor 6Y060M0 | 58644MB | UDMA 6 | Single * |
|
|
| ||||||
Sec_Master | Maxtor 6Y060M0 | 58644MB | UDMA 6 | Single | ||
The selected boot disk is marked '*'
Please make sure the RAID Type is "Single" then you can set the others type that you want next.
English
- 89 - | Technical Reference |
