SiS Serial ATA Mode
RAID | Select onboard Serial ATA chip function as RAID. (Default value) |
IDE | Select onboard Serial ATA chip function as IDE. |
OnboardLANBootROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled | Enable onboard LAN chip function. |
Disabled | Disable this function. (Default value) |
Onboard Serial Port 1
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8. |
Disabled | Disable onboard Serial port 1. |
Onboard Serial Port 2
Auto | BIOS will automatically setup the port 2 address. |
3F8/IRQ4 | Enable onboard Serial port 2 and address is 3F8. |
2F8/IRQ3 | Enable onboard Serial port 2 and address is 2F8. (Default value) |
3E8/IRQ4 | Enable onboard Serial port 2 and address is 3E8. |
2E8/IRQ3 | Enable onboard Serial port 2 and address is 2E8. |
Disabled | Disable onboard Serial port 2. |
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip
Normal | Set onboard I/O chip UART to Normal Mode. (Default value) |
IrDA | Set onboard I/O chip UART to IrDA Mode. |
ASKIR | Set onboard I/O chip UART to ASKIR Mode. |
SCR | Using as Smart Card Interface. |
UR2DuplexMode
Full | IR | Function Duplex Full. |
Half | IR | Function Duplex Half. (Default value) |
English
- 45 - | BIOS Setup |
