Procedures for Using the TV

Memorizing Channels

The LCD TV can memorize and store all available channels for both antenna and cable TV. After the channels are memorized, use the TV CH+/– buttons to scan through them. This eliminates the need to change channels using the number keys. There are three steps for memorizing channels:

1)Select a broadcast source; 2) Memorize channels (automatic); and 3) Add and/or Delete chan- nels (manual).

Selecting the Broadcast Source

Before your television can begin memorizing channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable TV system).

Press the MENU button.

● The OSD MENU is displayed.

Select CHANNEL SETUP using the

TV CH+/- buttons and then press the

VOL+ button.

Select ANTENNA using the

TV CH+/- buttons and then press the

VOL+ button.

Select TV for Antenna or CATV for Cable TV using the TV CH+/- buttons. If you are not sure which type of cable system you have, contact your cable company.

24

Page 24
Image 24
Go-Video TW1730 manual Memorizing Channels, Selecting the Broadcast Source, Press the Menu button