25
Procedures for Using the TV
Storing Channels in Memory (Automatic Method)The TV automatically searches for all available channels and stores them to memory.
This takes approximately one or two minutes.
First, select the correct signal source
(TV, CATV). See steps 1~4 on the
previous page.
Select AUTO PROGRAM using the
TV CH+/- buttons and then press the
VOL+ button.
The TV will begin storing all available
channels.
After all available channels have been
stored, the CHANNEL SETUP menu
reappears.
Press the EXIT button to exit the menu.
Viewing Saved Channels
Press the TV CH+/- buttons.
●Only saved channels are selected.
●The AUTO MEMORY function can
select channels using the TV CH+/-
buttons only when more than 3
channels have been saved.