29.Orient the Locking Bar (114) as shown. Hold the Locking Bar between the left Barbell Carriage (104) and the right Barbell Carriage (not shown). Insert the Barbell (113) into the left Barbell Carriage, the Locking Bar, and the right Barbell Carriage. Center the Barbell in the Barbell Carriages. Then, engage the Locking Bar into slots in the Front Uprights (11).
30.Attach a Barbell Adapter (102) to the Barbell
(113) with an M10 x 25mm Screw (128) and a Large Washer (135). Then, press a 48mm x 3mm Round Inner Cap (103) into the Barbell Adapter.
Attach the other Barbell Adapter (not shown) in the same way.
31.Insert a Phillips screwdriver into the indicated hole in a Swivel Bracket (31). Use the Phillips screwdriver to tighten the Trunnion (70) and the Swivel Bracket into the Top Frame (17).
Attach the other Swivel Bracket (not shown) in the same way.
29 |
|
|
|
|
| 104 |
|
114 |
|
| 113 |
|
| 11 |
|
30 |
|
|
|
|
|
| 135 |
|
| 113 | 128 |
|
|
| |
|
|
| 103 |
|
|
| 102 |
31 |
|
|
|
|
| 17 |
|
|
| 70 |
|
| 31 | Hole |
|
|
|
|
18
