23.Attach the Weight Carriage Frame (18) to the Weight Carriage Guides (21) with two M8 x 40mm Bolts (136) and two M8 Nylon Locknuts (170). Do not tighten the Nylon Locknuts yet.
24.Locate the indicated holes inside the Center Upright (13). Insert an M10 x 25mm Screw (128) into the lower hole, and tighten the Screw into the Weight Carriage Frame (18). Next, tighten an M10 x 25mm Screw (128) into the upper hole.
Press a 75mm Square Inner Cap (95) into the Top Frame (17).
See step 21. Tighten the M10 Nylon Locknut (153). See step 23. Tighten the M8 Nylon Locknuts (170).
23 |
|
170 |
|
18 |
|
| 136 |
| 21 |
24 | 95 |
17 | 18 |
128 | |
| 13 |
Holes
25. Grease the top of the Right Adjustment Bracket | 25 | 134 | |
(24), and insert it into the Top Frame (17). See | |||
| 86 | ||
the inset drawing. Orient two Bracket Retainers |
| 171 | |
(73) so that the teeth bend upward. Using the |
| 88 | |
included retainer tool, tap the Bracket Retainers |
| ||
|
| ||
onto the Right Adjustment Bracket. |
| Retainer | |
|
| ||
Attach the Right Adjustment Bracket (24) to the |
| Tool | |
| 17 | ||
Top Frame (17) with an M10 x 30mm Screw |
| ||
(134), an M10 Lock Washer (86), an M10 Large | 73 | 25 | |
| |||
Washer (171), and a Bushing Cap (88). Do not |
| Grease | |
overtighten the Screw; the Right Adjustment |
| ||
|
| ||
Bracket must pivot easily. |
|
| |
Attach the Left Adjustment Bracket (25) in the | 24 | 24 | |
same way. | |||
|
| ||
| 16 |
|
