Gold's Gym GGCCBE8057.0 manual 153 140 148 151 127 125

53.Wrap the Low Cable (80) over a Small Pulley (74). Attach the Small Pulley and two Half Pulley Guards (91) to the Double “U”-bracket (98) with an M10 x 45mm Bolt (140) and an M10 Nylon Locknut (153). Make sure that the Half Pulley

Guards are oriented as shown.

54.Route the Low Cable (80) through the Weight Carriage Base (20) as shown. Attach two Small Pulleys (74) inside the Weight Carriage Base with two M10 x 55mm Bolts (127), four M10 Washers (148), four M10 x 6.5mm Spacers (151), and two M10 Nylon Locknuts (153).

55.Wrap the Low Cable (80) over a Small Pulley

(74).Attach the Small Pulley, a Small Cable Trap (93), and two Half Pulley Guards (91) at the sec- ond hole from the bottom of the two Pulley Plates

(92)with an M10 x 48mm Bolt (125) and an M10 Nylon Locknut (153). Make sure that the Cable

Trap and the Half Pulley Guards are oriented as shown.

53
	98
	91
153	74
91
	140
	80
54
	80
	74
148
153
	20
	151
151	148
	151
	127
55
153	91
	92
	91
	93
	125
	74
	80

27