18.Attach the Left Spotter Hook (115) to a Barbell Spotter (109) with an M10 x 25mm Bolt (166) and an M10 Nylon Locknut (153). Do not overtighten the Nylon Locknut; the Left Spotter Hook must pivot easily.
Identify a Barbell Guide (112), which is slightly shorter than a Weight Carriage Guide (not shown). Slide a Barbell Spotter Bumper (111) and the Barbell Spotter (109) onto the Barbell Guide.
Orient a Barbell Carriage (104) as shown. Slide a Barbell Bumper (107) and the Barbell Carriage onto the Barbell Guide (112).
18
104
Long End
153
107
109
166
115
111
112
19.Insert the Barbell Guide (112) into the indicated hole in the Base (14). Next, lift the Barbell Guide up into the hole in the Top Frame (not shown). Attach the Barbell Guide to the Base with an M10 x 55mm Bolt (127), two M10 Washers (148), two M10 x 6.5mm Spacers (151), and an M10 Nylon Locknut (153).
Engage the Left Spotter Hook (115) into an adjustment slot near the bottom of the Front Upright (11).
Repeat steps 18 and 19 with the other Barbell Guide (not shown). Always position both Barbell Spotters (109) at the same height.
19 |
| |
115 |
| |
11 | 109 | |
112 | ||
| ||
153 | Hole | |
| ||
148 | 14 | |
151 | ||
| 151 | |
| 148 | |
| 127 |
14
