26. Grease the bottom of the Right Adjustment | 26 |
|
|
|
Bracket (24), and slide the Right Arm (23) onto |
|
|
| |
|
|
|
| |
the Right Adjustment Bracket. See the inset |
|
|
|
|
drawing. Orient two Bracket Retainers (73) so |
| 156 |
|
|
that the teeth bend downward. Tap the Bracket |
|
|
| |
| 157 |
|
| |
Retainers onto the Right Adjustment Bracket. |
|
|
| |
| 144 |
| 25 | |
|
| 24 | ||
Attach the Right Arm (23) to Right Adjustment |
|
| Grease |
|
Bracket (24) with an M10 x 30mm Screw (134), |
| 23 |
| |
|
|
| ||
an M10 Lock Washer (86), an M10 Large Washer |
| 85 | 88 | 22 |
(171), and a Bushing Cap (88). Do not overtight- |
| |||
|
| |||
en the Screw; the Right Arm must pivot easily. |
| 171 |
|
|
Pull the Arm Knob (85), and engage it into a hole |
|
| 86 |
|
24 | 134 |
|
| |
in the Right Adjustment Bracket (24). Then, attach |
|
| ||
|
|
| ||
an M6 x 15mm Bolt (144) to the Right Adjustment | 73 |
|
|
|
Bracket with an Adjustment Bracket Bushing |
|
|
|
|
(157) and an M6 Nylon Locknut (156). |
|
|
|
|
Attach the Left Arm (22) to the Left |
|
|
|
|
Adjustment Bracket (25) in the same way. |
|
|
|
|
| Retainer Tool |
|
|
|
27.Identify the Right Arm Pad (89), which is labeled with an “R.” Attach the Right Arm Pad to the Right Arm (23) with two M6 x 16mm Screws (141).
Attach the Left Arm Pad (90) to the Left Arm (22) in the same way.
28.Attach the Butterfly Backrest (69) to the Center Upright (13) with two M6 x 90mm Screws (126) and two M6 Washers (149).
27 |
23 |
22 |
141 |
89 |
90 |
28 |
126 |
149 |
126 |
149 |
13 |
69 |
17
