Connections (Continued)
Connecting an Amplifier/Receiver
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1AUDIO OUT jacks (OPTICAL O or COAXIAL X) to
the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.Connect one of the DVD Recorder+VCR’s DIGITAL
You will need to activate the DVD Recorder+VCR’s
2 digital output; see “AUDIO Settings” on page 21.
Digital Multi-Channel Sound
A digital
Caution:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
otes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–5.1 channel digital surround sound via the digital con- nection can only be obtained if your receiver is equipped with a digital
–To see the audio format of the current DVD on the on- screen display, press AUDIO.
ote
The DVD Recorder+VCR does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS
Rear of DVD Recorder+VCR
O | A | X |
OPTICAL | L | R | COAXIAL |
DIGITAL INPUT | AUDIO INPUT | DIGITAL INPUT | |
Amplifier (Receiver)
16
