20
Initial Setup (Continued)

TV Aspect Ratio

4:3 Letterbox: Select when a standard 4:3 TV is con-
nected. Displays theatrical images with masking bars
above and below the picture.
4:3 Fullscreen: Select when a standard 4:3 TV is con-
nected. Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
16:9 Widescreen: Select when a 16:9 widescreen TV
is connected.

Progressive Scan

Progressive Scan Video provides the highest picture
quality with reduced flickering.
•If you are using the COMPONENT/PROGRESSIVE
VIDEO OUT jacks, but are connecting the DVD
Recorder+VCR to a standard (analog) television, set
Progressive Scan to OFF.
•If you are using the COMPONENT/PROGRESSIVE
VIDEO OUT jacks for connection to a TV or monitor
that is compatible with a Progressive Scan signal, set
Progressive Scan to ON.
Caution
Once the setting for Progressive Scan output is entered,
an image will only be visible on a Progressive Scan
compatible TV or monitor. If you set Progressive Scan
to ON in error, you must reset the DVD Recorder+VCR.
First, remove the disc in the DVD Recorder+VCR. Next,
press STOP(x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible
on a conventional analog TV or monitor.

Factory Setting

If you wish, you can reset the DVD Recorder+VCR to
its original factory settings. Select “SET” then press
ENTER.
The Initialize menu will appear. Use the b B buttons to
select “Yes” and press ENTER.
ote
Some options cannot be reset, including Movie Rating,
Password, and Country Code.
LANGUAGE Settings

Display Menu Language

Select a language for the DVD Recorder+VCR Setup
menu and on-screen displays.

Disc Menu/Audio/Subtitle Language

Select your preferred language for Disc Menus, Audio
soundtracks, and Subtitles.
Original: The disc’s default language is selected.
Other: To select another language, select Other then press
ENTER. Use the 0-9 and ENTER buttons to input the corre-
sponding 4-digit number according to the “Language Code
List” on page 59. If you a mistake before pressing ENTER,
press bto move the cursor back and correct it.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting ON
OFF
Prev. Select Close
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting
4:3 Letterbox
4:3 Fullscreen
16:9 Widescreen
Prev. Select Close
Tuning Band
Auto Channel Set
CH. Add/Del
Clock Set
TV Aspect
Progressive Scan
Factory Setting SET
Prev. Select Close
No
It initializes the system status.
Proceed?
Yes
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
English
Prev. Select Close
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
English
French
Spanish
Italian
Japanese
Chinese
Other - - - -
Original
Prev. Select Close