Using Auto Lap by

Position

You can use Auto Lap to automatically mark the lap at a specific position. This feature is helpful for comparing your performance over different parts of a ride (for example, a long climb or training sprints).

1.Press and hold MENU.

2.Select Settings > Bike Settings > Auto Lap.

3.In the Auto Lap Trigger field, select By Position.

4.Select an option:

Select Lap Press Only to trigger the lap counter each time you press LAP and each time you pass any of those locations again.

Training with Your Edge

Select Start And Lap to trigger the lap counter at the GPS location where you press START and at any location during the ride where you press LAP.

Select Mark And Lap to trigger the lap counter at a specific GPS location marked before the ride and at any location during the ride where you press LAP.

5.Customize optional lap data fields

(see page 37).

6.Go for a ride.

Note: During courses, use the By Position option to trigger laps at all of the lap positions saved in the course.

Edge 500 Owner’s Manual