To turn the non-zero averaging on or off, press and hold MENU, and select Settings > Bike Settings > Data Avg.

Replacing the GSC 10 Battery

The GSC 10 contains a user- replaceable CR2032 battery.

Note: Contact your local waste disposal department to properly dispose of batteries.

1.Locate the circular battery cover on the side of the GSC 10.

Battery

cover

CR2032

battery

ANT+ Sensors

2.Use a coin to twist the cover counter-clockwise until it is loose enough to remove (arrow points to unlocked).

3.Remove the cover and battery.

4.Wait 30 seconds.

5.Insert the new battery with the positive side facing up.

Note: Be careful not to damage or lose the O-ring gasket on the cover.

6.Use a coin to twist the cover back into place (arrow points to locked).

Battery

cover Unlocked

Arrow Locked

Edge 500 Owner’s Manual