ANT+ Sensors

Using the GSC 10

1.Turn on the Edge.

2.Bring the Edge within range (3 m) of the GSC 10.

3.Press and hold MENU.

4.Select Settings > Bike Settings > [Bike 1] > ANT+ Spd/Cad.

5.Select Yes > Rescan.

6.Press BACK to return to the main menu.

When the GSC 10 is paired, a message appears and the cadence icon appears on the main menu.

7.Customize optional data fields

(page 37).

8.Go for a ride.

About the GSC 10

Cadence data from the GSC 10 is always recorded. If there is no GSC 10 paired, GPS data is used to calculate the speed and distance.

Cadence is your rate of pedaling or “spinning” measured by the number of revolutions of the crank arm per minute (rpm). There are two sensors on the GSC 10: one for cadence and one for speed.

For information about cadence alerts, see page 9.

Non-Zero Averaging for

Cadence Data

The non-zero data-averaging setting is available if you are training with an optional cadence sensor. The default setting is to exclude zero values that occur when you are not pedaling.

28

Edge 500 Owner’s Manual