2.Place the rubber disk on the back of the bike mount.

The rubber tabs align with the back of the bike mount so it stays in place.

3.Place the bike mount on the bike stem.

4.Attach the bike mount securely using the two bands.

Rubber

Bike mount

disk

notches

 

Getting Started

5.Align the tabs on the back of the Edge with the bike mount notches.

6.Press down slightly and turn the Edge clockwise until it locks into place.

Bands around the bike stem

Edge Mounted on the

Bike Stem

Releasing the Edge

1.Turn the Edge clockwise to unlock the device.

2.Lift the Edge off the mount.

Edge 500 Owner’s Manual