Graco 500 Putting on the Heart Rate Monitor

Putting on the Heart Rate Monitor

Wear the heart rate monitor directly on your skin, just below your breastplate. It should be snug enough to stay in place during your ride.

1.Push one tab on the strap through the slot in the heart rate monitor.

Tab

Heart Rate Monitor Strap

Slot

Heart Rate Monitor (Front)

Electrodes

Heart Rate Monitor (Back)

ANT+ Sensors

2.Press the tab down.

3.Wet both electrodes on the back of the heart rate monitor to create a strong connection between your chest and the transmitter.

4.Wrap the strap around your chest and attach it to the other side of the heart rate monitor.

The Garmin logo should be right‑side up.

After you put on the heart rate monitor, it is on standby and ready to send data.

Edge 500 Owner’s Manual